500mm (w) x 1200mm (h) Electric "Mira" Brushed Brass Towel Rail (Single Heat or Thermostatic Option)
This 500mm (w) x 1200mm (h) Mira Electric designer towel rail has a high quality, brushed brass pvd coating with 38mm chunky, cylindrical bars and is supplied pre-filled with heating solution. Your chosen electric heating element will be supplied along with the towel rail.
Data sheet
- Outer Finish
- Brushed Brass
- Height (mm)
- 1200mm
- Width (mm)
- 500mm
- Design
- Mira
- Colour Family
- Brass
- Material
- Mild Steel
- Output Watts
- 600W
- Tube Diameter (mm)
- 38mm Horizontal Tubes
- Tube Bar Pattern
- 7 Tubes
- Fixing Kit
- Four point brushed brass wall fixings
- Accessories
- Bleed Valves & Blank Plugs
- Maximum Operating Pressure
- 6Bar
- Guarantee
- 10 Years (Towel Rail) 1 Year (Element) BS EN 442
- Projection
- 130mm
- Volts
- 230VAC
- IP Rating
- IP55 - Single Heat, IPX4 - Thermostatic
- Fuel Type
- Electric
- Brand
- NWT Direct
Why Buy This Electric Brushed Brass Designer Towel Rail?
"The 500mm (w) by 1200mm (h) Mira Brushed Brass towel rail is a statement piece of designer heating. The towel rail can be mounted with the fins pointing to the left or the right so if you have limited access to towels this would be ideal."
Choosing your Electric Heating Element:
- This Anthracite Electric Towel Rail can be purchased with 2 different suitable Electric Heating Elements depending on your requirements.
1. Single Heat (Fixed Operating Temperature 70°c) Electric Element.
2. Thermostatic (Manually Controlled Operating Temperature 5 - 70°c) Electric Element.
We recommend choosing a thermostatic option when installing larger towel rails or where children may be present.
Is this Electric Towel Rail Pre-Filled?
YES! The towel rail will arrived pre-filled with a pre-mixed solution designed specifically for heated towel rails. This protects against rust & corrosion and will assist in efficient heat transfer. Your chosen electric heating element will be supplied separately along with the towel rail so you can choose whether to install this on the left or right hand side. NOTE: The element must always be installed vertically and we recommend all installation work is carried out by a qualified professional.
Product Description:
- Our range of chrome designer towel rails are designed in house and manufactured at our modern factory.
- The high heat output of our towel rails are achieved from the sourcing of high quality steel finished with over a robust PVD finish.
- All our heat output figures for our electric towel rail range are listed from the wattage of the supplied element. eg 300W Element x3.41 = 1023 BTUs
- We have designed the individual bar patterns of each towel rail to optimise the surface area for heat output while integrating spaces for functionality to allow you to hang your towels.
- All our towel rails are supplied with a wall mounting kit (including bleed valve and blank plugs)
- This towel rail is supplied with our 10 year manufacturer guarantee. The electric heating element has a 1 year guarantee. (Euronorm BS EN 442).
NOTE: Please do not compare this chrome towel rail with cheap imports, which will be aesthetically less appealing, have a poor quality finish and a reduced heat outputs.
Others in range
This is just a guide for reference only, rooms may require more than one radiator. If this applies to you, divide the required output between the number of radiators required. All figures given are for Delta T 50°