850mm (w) x 440mm (h) "Corwen" Black Flat Panel Horizontal Radiator (6 Sections)

  • In Stock
  • Btus: 1951
  • 572 Watts
850mm (w) x 440mm (h) Corwen Black Flat Panel Radiator
  • 850mm (w) x 440mm (h) Corwen Black Flat Panel Radiator
  • 850mm (w) x 440mm (h) "Corwen" Black Flat Panel Horizontal Radiator (6 Sections) - Close up

The Corwen Textured Black Radiator is a unique design with large flat panels and rounded edges set this in a market of its own! While looking bold and sharp creating a focal point in any room it also boasts impressive heat outputs in comparison with most conventional radiators. 

VAT included
local_shipping If you order before 2pm your order will be delivered FREE on Tuesday, 28th June

Data sheet

Height (mm)
Width (mm)
Outer Finish
Black Powder Coating
Mild Steel
Output BTUs
Output Watts
Tube Diameter (mm)
60 x 10
Tube Bar Pattern
6 Flat Panels
Fixing Kit
Four point matt black wall fixings plus full instructions
Bleed Valves & Blank Plugs
Maximum Operating Pressure
10 Years Euronorm BS EN 442
70 - 80mm
Pipe Centres
805mm plus valve widths, Underside: 770mm
Socket Width
½BSP (NOTE: Valves not Included)
Fuel Type
Central Heating
NWT Direct NWT Direct

Why Buy This Black Radiator?

"The Corwen Black range is a sleek modern radiator that comes in both vertical and horizontal models available in 5, 6 or 7 panels. Each panel is 60mm in diameter with a rounded edge to soften the feel and blend seamlessly into a variety of roomsets. The Corwen Black Range is available in multiple sizes in both vertical and horizontal orientation."

Product Description:

- Our range of radiators are designed in house and manufactured at our modern factory.

- The high heat output of our radiators are achieved from the sourcing of high quality steel, finished in a robust textured Matt Black Powder coated finish.

- All our heat output figures (BTU'S) are listed at Delta T50.

- All our radiators are supplied with a wall mounting kit (including bleed valve and blank plugs)

- This radiator is supplied with our 10 year manufacturer guarantee. (Euronorm BS EN 442). 

NOTE: Please do not compare this product with cheap imports, which will be aesthetically less appealing, manufactured with thinner tubes, have a poor finish and a reduced heat output.

This is just a guide for reference only, rooms may require more than one radiator. If this applies to you, divide the required output between the number of radiators required. All figures given are for Delta T 50°