420mm (w) x 1800mm (h) "Brecon" Chrome Oval Tube Vertical Radiator (6 Sections)
The Brecon Designer Radiator range is a popular modern design using an oval tube profile (25mm x 50mm) which compliments a variety of room sets and interior finishes.
Data sheet
- Outer Finish
- Sparkling Chrome
- Height (mm)
- 1800mm
- Width (mm)
- 420mm
- Design
- Brecon
- Colour Family
- Chrome
- Material
- Mild Steel
- Output BTUs
- 3200
- Output Watts
- 937
- Tube Diameter (mm)
- 25 x 50
- Tube Bar Pattern
- 6 Oval Tubes
- Fixing Kit
- Four point chrome plated wall fixings
- Accessories
- Bleed Valves & Blank Plugs
- Maximum Operating Pressure
- 6 Bar
- Guarantee
- 10 Years Euronorm BS EN 442
- Projection
- 80mm
- Pipe Centres
- 420mm plus valve widths
- Socket Width
- ½BSP (NOTE: Valves not Included)
- Fuel Type
- Central Heating
- Brand
- NWT Direct
Why Buy This Radiator?
"The NWT Brecon Chrome radiator range is a stunnning, modern design which is showcased by the feature vertical oval tubes. The tubes measure 25x50mm creating a large surface area for heat transfer while providing a focal point of the room. The Brecon Chrome Range is available in multiple sizes in both vertical and horizontal orientation."
Product Description:
- Our range of designer radiators are designed in-house and manufactured at our modern factory.
- The high heat output of our radiators are achieved from the sourcing of high quality steel, finished with over 50 microns of chrome.
- All our heat output figures (BTU'S) are listed at Delta T50.
- All our radiators are supplied with a wall mounting kit (including bleed valve and blank plugs)
- This radiator is supplied with our 10 year manufacturer guarantee. (Euronorm BS EN 442).
NOTE: Please do not compare this product with cheap imports, which will be aesthetically less appealing, manufactured with thinner tubes, have a poor finish and a reduced heat output.
Radiator Valves
Others in range
1380mm (w) x 500mm (h) "Brecon" Chrome Oval Tube Horizontal Radiator (20 Sections)
This is just a guide for reference only, rooms may require more than one radiator. If this applies to you, divide the required output between the number of radiators required. All figures given are for Delta T 50°